Lamp Post Banner Printing

Double-sided lamp post banners with aluminium brackets — jubilee clips included, delivered free.

Advertising on Street Furniture You Don't Own

Lamp posts line every high street, retail park, campus and town centre. They're already in position, already at the right height, and already where people walk and drive past. A banner bracket turns each one into a display without a single new post going in the ground.

800 x 2000mm double-sided banners on blockout PVC, with weatherproof aluminium brackets and jubilee clips for fitting. From a single unit, with free UK delivery.

Double-Sided Blockout PVC

The material matters more here than on most outdoor banners, because both faces are seen.

A lamp post banner is viewed from both directions of traffic. Standard PVC printed on both sides shows ghosting — a dark design on one face bleeds faintly through to the other. Double-sided blockout PVC has an opaque core between the two printed faces, so neither side shows through.

It's also a heavier grade than a standard banner, which is what it needs to be hanging in the wind at four metres for months at a time.

The two sides don't have to match. Supply separate artwork if you want different messaging facing each direction.

The Hardware

Brackets are weatherproof aluminium castings with GRP tubes — aluminium because it doesn't rust, and glass-reinforced plastic because it flexes rather than fatiguing in constant wind loading.

The banner has pole pockets top and bottom, so it slides onto the GRP tubes and sits under tension rather than flapping. Two securing eyelets hold it in place.

Extra-large jubilee clips are supplied for fixing the brackets to the post. No drilling, no permanent fixings, and the brackets can be repositioned for height — useful when posts vary or when you want the banner clear of a bus shelter or parked vehicles.

Hardware carries a 12 month guarantee.

Before You Order: Permission

Worth raising early, because it catches people out.

Lamp posts are almost always owned by the local council or the highways authority, and attaching anything to one usually needs their consent. Most councils operate a licensing scheme for lamp post banners, often through the highways department or a town centre management team, and some charge per post per month.

Private sites are simpler — a retail park, a university campus, a business park or a hospital site will have its own facilities team, and permission is generally a conversation rather than an application.

Worth sorting before the artwork, not after.

Where They Go

  • Town centres and high streets — seasonal campaigns, Christmas lights switch-ons, markets, civic events.
  • Business improvement districts — area branding and event promotion across a run of posts.
  • Retail parks — store promotion and wayfinding on private roads.
  • University and college campuses — open days, term dates, wayfinding.
  • Hospitals and large sites — directional signage across a spread-out estate.
  • Sports grounds and venues — matchday branding, sponsor visibility on approach roads.
  • Festivals and events — route marking and branding along an approach.

They work best in runs. A single banner reads as an advert; a dozen down a street reads as a campaign.

Designing a Lamp Post Banner

A tall, narrow format seen from below at speed. That changes what works.

Vertical layouts only. At 800 x 2000mm the format is strongly portrait. A logo and three words stacked works; a horizontal strapline doesn't.

Design for the angle. The banner sits several metres up, so most people see it looking upwards and foreshortened. Keep the key message in the upper half where it's clearest.

Allow for the pole pockets. The top and bottom sections are used for the weld and pocket, so treat those strips as quiet areas — background only, no text or logos.

Resolution at two metres. An image that looks sharp on screen can fall apart at full size. Check photographs are genuinely high resolution rather than upscaled.

Artwork Requirements

  • Finished size: 800 x 2000mm
  • Bleed: 3mm all round
  • Resolution: 300 dpi minimum
  • Format: PDF
  • Colour: CMYK
  • Fonts: outlined or embedded
  • Double sided: supply each design on its own page. If both sides are the same, supply it once.

A free template is available, with eyelet positions marked. Check those marks have been removed before exporting your print-ready file.

Every file is checked by a real person before printing, so obvious problems get flagged. We don't make changes or fixes to artwork — files should be supplied print-ready.

Replacement Graphics

The brackets outlast the campaign by years. Replacement banners can be ordered on their own and swapped over in minutes, so a seasonal programme means new graphics rather than new hardware each time.

Custom banner heights can be arranged on request if the standard 2000mm doesn't suit the posts you're working with.

Turnaround & Delivery

Production takes 3–4 working days. Turnaround covers production only — delivery is on top of that.

Standard UK delivery is free on all lamp post banner orders, whatever the quantity. Collection from our Burnley production facility is also available.

Also worth a look: outdoor banner stands for freestanding display where there's no post to use, and our outdoor banner frame for a fixed 3m x 1m display.

FAQs

What size are the banners?
800 x 2000mm as standard. Custom heights can be arranged on request.

What's the minimum order?
One. Order a single unit or a full run for a street.

Are fixings included?
Yes. Extra-large jubilee clips are supplied for fitting the brackets to a lamp post. No drilling required.

Do I need permission to put these up?
On public lamp posts, almost certainly. Most councils license lamp post banners through highways or town centre management, sometimes with a charge per post. On private sites, speak to the site's facilities team.

Can the two sides be different?
Yes. Supply each design on its own page. If both sides are the same, supply it once.

Will the design show through from the other side?
No. The double-sided blockout PVC has an opaque core between the two printed faces.

Can I replace the banner without replacing the brackets?
Yes. Replacement graphics can be ordered separately and fitted in minutes.

Can the bracket height be adjusted?
Yes. Brackets can be repositioned on the post to suit the location.

Is there a guarantee?
The hardware carries a 12 month guarantee.

Is delivery really free?
Yes. Standard UK delivery is included on all lamp post banner orders.

  1.  Lamp Post Banner Printing
  1.  Lamp Post Banner Printing
  2.  Lamp Post Banner
  3. product image
FileSizeDownload
Mistral 800mm X 2000mm Template3.6mb
Spec-Sheet Mistral Lamp-Post-Banner0.2mb